SHINING STAR OF ROCK DRILL SPARE PARTS
Call us 9:00am - 6:00pm
Monday to Friday
E-mail us
Machine | Type | Description | |
---|---|---|---|
Troidon 44 XP | Resemin Jumbo | It incorporates the fastest rock drill of the market, Montabert HC 95 of 22 kW, equipped with. | Review |
PANTERA DP1600i | Sandvik Surface Machine | Designed for large hole size drilling, its practical intelligence and support of high-level automation solutions make it perfect for production drilling in large quarries or open pit mines. | Review |
BOOMER 282 | Epiroc Boomer Machine | It is a rock drill machine used for direct controlled hydraulic tunneling and drilling in narrow tunnels. | Review |
DL411 | Sandvik Jumbo Machine | It is an electro-hydraulic long hole drill designed for small to medium scale production in underground mines. | Review |
STD14E | Soosan / Junjin | The Soosan STD series hydraulic crawler drilling rigs, have been developed to be reliable top hammer drilling rigs for surface blasting. | Review |
BOOMER T1D | Epiroc Boomer Machine | It is the most maneuverable and fastest in its class. | Review |
ROC D5 | Epiroc Surface Machine | The main application area is aggregate quarries where efficiency and environmental impact are very important. | Review |
DS410 | Sandvik Jumbo Machine | It is a highly versatile and compact electro-hydraulic rock drill designed for rock reinforcement in small to medium section underground mines. | Review |
BOOMER L1D | Epiroc Boomer Machine | For greater productivity, rig components are crafted for extreme durability. | Review |
DT820-SC | Sandvik Jumbo Machine | It is an electro hydraulic jumbo with two booms for fast and accurate drilling in tunneling of 12 - 110 m² sections. | Review |
HCR910DS | Furukawa Surface Machine | Thanks to advanced hydraulic and compressed air technology, energy capacity can be transferred to each part with minimal loss. In this way, the systems work with high efficiency. | Review |
AXERA5-126 | Sandvik Jumbo Machine | It is a single boom electro hydraulic jumbo for mine development and tunneling in sections up to 38 m² | Review |
BOOMER S1D | Epiroc Boomer Machine | Boomer S1 is a hydraulic face drilling rig suitable for small drifts and tunnels with cross sections up to 31 m². | Review |
DL331 | Sandvik Jumbo Machine | It is an electro-hydraulic long hole drill designed for small to medium scale production in underground mines. | Review |
SIMBA 1250 | Epiroc Boomer Machine | To increase uptime and vehicle life, the rig is designed with easy access to service points for efficient daily checks and maintenance. | Review |
ZJ21 | Komatsu Jumbo | The new ZJ21 jumbo drill delivers exceptional maneuverability. | Review |
DT820 | Sandvik Jumbo Machine | It is an electro hydraulic jumbo with two booms for fast and accurate drilling in tunneling of 12 - 110 m² sections. | Review |
DD321 | Sandvik Jumbo Machine | It is capable of front drilling, cross cut drilling and bolt hole drilling. | Review |
HCR1000EDSII | Furukawa Surface Machine | It is fully hydromechanical design and field proven. | Review |
DP800İ | Sandvik Surface Machine | It is a hydraulic, diesel engine tophammer drill rig. It fits perfectly in large quarries, open pit mines and construction sites. | Review |
MD5050T | CAT Machine | With a heavy-duty 3.04 m (10 ft) boom and 0.61 m (2 ft) extension on the MD5050, more pattern coverage is achieved. | Review |
BOOMER M2C | Epiroc Boomer Machine | Boomer M is a robust face drilling rig for tunneling and mining applications with a coverage area up to 65m2. | Review |
ECD35 | Everdigm Machine | The advanced and optimized design of the EVERDIGM hydraulic crawler drill provides access to key components for safety and comfort as well as simple and fast maintenance. | Review |
BOOMER XL3D | Epiroc Boomer Machine | The Boomer XL3 D is a robust three-boom face drill rig providing an extra-large coverage of 178 m2 with the boom BUT 35L. | Review |
Bolter 88 | Resemin Jumbo | BOLTER 88 is a drilling rig for mechanized roof bolting and meshing in medium-sized sections, from 4x4 up to 7.4 m high. | Review |
FACE MASTER 1.7 | Mine Master Jumbo | Designed for drilling blast holes of diameters between 41 mm and 76 mm and of net length 3.2 m. | Review |
HCR1000ER | Furukawa Surface Machine | It is fully hydromechanical design and field proven. | Review |
MD5125 | CAT Machine | power group that’s ideally sized for drilling 89 mm-152 mm (3.5 in-6.0 in) holes. | Review |
PANTERA DP1500İ | Sandvik Surface Machine | Has practical intelligence. It fits perfectly in large quarries, open pit mines and construction sites. | Review |
STD142E | Soosan / Junjin | The Soosan STD series hydraulic crawler drilling rigs, have been developed to be reliable top hammer drilling rigs for surface blasting. | Review |
JOY RR-2MB | Komatsu Jumbo | The RR-2MB hydraulic jumbo drill, a dual-boom hydraulic rig, is designed for drilling vertical, horizontal and angled holes in underground production or development headings. | Review |
BOOMER E1 | Epiroc Boomer Machine | Boomer E2 rigs have extensive coverage areas of up to 112 m2, making them ideal for large mining applications and construction projects. | Review |
DC560 | Sandvik Surface Machine | It is a robust drill in construction and therefore well suited for working in difficult terrains. | Review |
Tiger DG800 | Sandvik Surface Machine | It is specifically designed for construction projects, site preparation, wall inspection and pipeline drilling, as well as production drilling in medium-sized quarries. | Review |
SmartRIG F9C | Epiroc Surface Machine | Designed with the smallest detail to be given, your safest, fastest and most efficient surface drill rig. | Review |
BOOMER S1L | Epiroc Boomer Machine | Boomer S1 L is a low-profile hydraulic face drilling rig suitable for small drifts and tunnels with cross sections up to 29 m². | Review |
DU411 | Sandvik Jumbo Machine | It can be used to drill 3 5/8" (92 mm) to 8.5" (216 mm) diameter holes and to a depth of greater than 330 ft (100 m). | Review |
DD220L | Sandvik Jumbo Machine | DD220L is a single boom electro hydraulic drillrig for productive drilling in narrow vein applications. | Review |
HCR1500EDII | Furukawa Surface Machine | The HCR1500 ED Series with extendable boom includes a self-adjusting drill system that ensures high productivity whatever the drilling situation. | Review |
DL310-7 | Sandvik Jumbo Machine | It is a small and medium sized electro-hydraulic long hole drill for underground mines. It has the capacity to drill 64 - 102 mm holes up to 38 meters. | Review |
BOOMER XE3C | Epiroc Boomer Machine | Boomer XE3 C, It is a hydraulic drilling machine designed for tunnels up to 192 m². | Review |
BOOMER M1L | Epiroc Boomer Machine | Boomer M1 L is a robust, hydraulic face drilling rig suitable for low to medium height applications with cross sections up to 36 m2. | Review |
DD421 | Sandvik Jumbo Machine | It is an electro-hydraulic jumbo with two booms for fast and accurate drilling in tunneling sections of 8 - 60 m². | Review |
T2RW | Furukawa Jumbo Machine | High performance two arm underground drilling rig. It is a compact and fast machine. | Review |
STD11 | Soosan / Junjin | The Soosan STD series hydraulic crawler drilling rigs, have been developed to be reliable top hammer drilling rigs for surface blasting. | Review |
DX700 | Sandvik Surface Machine | It is an above ground hydraulic rock drill. Equipped with HL710. | Review |
DS210L | Sandvik Jumbo Machine | Semi-mechanical, single-person operated, electro-hydraulic low profile bolting machine for rock reinforcement in excavations with low headroom up to 1.7 m. | Review |
BOOMER M | Epiroc Boomer Machine | Boomer M is a robust face drilling rig for tunneling and mining applications with a coverage area up to 65m2. | Review |
DL2720 | Sandvik Jumbo Machine | It is a fully mechanized and compact electro-hydraulic top hammer long hole drill designed for underground mining of 3.2 x 3.2 meters or larger. | Review |
JD1500E | Soosan / Junjin | Equipped with standard drifter YH200 - JET-13. It is a new generation hydraulic drill. | Review |
MD5075 | CAT Machine | Achieves large pattern coverage with a sturdy extendable boom and reduces your cycle time with an efficient carousel rod changer. | Review |
BOOMER E3C | Epiroc Boomer Machine | These devices have self-diagnosis capabilities to optimize uptime. | Review |
DL321 | Sandvik Jumbo Machine | It is a fully mechanical and compact electro-hydraulic top hammer long hole drill designed for underground batch mining of 3.2 x 3.2 m or larger. | Review |
DC550 | Sandvik Surface Machine | Its robust construction and advanced cooling system make it well suited for operating in extreme heat and cold as well as in harsh terrain. | Review |
SIMBA S7D | Epiroc Boomer Machine | Simba S7 is a long-hole drilling rig for small to medium sized drifts in the 51 to 89 mm hole range. | Review |
Ranger DX600 | Sandvik Surface Machine | It is an above ground machine that provides power, precision and versatility ideal for construction, quarrying or surface mining operations. | Review |
DS311 | Sandvik Jumbo Machine | It is a highly versatile and compact electro-hydraulic rock drill designed for rock reinforcement in small to medium section underground mines. | Review |
DL210-5 | Sandvik Jumbo Machine | It is a compact and flexible electro-hydraulic long hole jumbo for production drilling in underground mines. | Review |
PANTERA 800 | Sandvik Surface Machine | It is an above ground hydraulic rock drill. Equipped with HL800T. | Review |
ECD45 | Everdigm Machine | The advanced and optimized design of the EVERDIGM hydraulic track drill provides safety and comfort. | Review |
BOOMER 104 | Epiroc Boomer Machine | It is a rock drill machine used for direct controlled hydraulic tunneling and drilling in narrow tunnels. | Review |
PANTERA DI6400 | Sandvik Surface Machine | It is designed to meet the future needs of the mining industry in terms of safety, increased production and full automation options. | Review |
Tiger DG700 | Sandvik Surface Machine | The Tiger DG700 is highly productive and user-friendly, and is also equipped with a series of higher safety and environmental features bringing the best drilling experience possible. | Review |
DP1500İ | Sandvik Surface Machine | It offers the highest power in its class for improved penetration rates. Makes holes 89 to 152 millimeters in diameter. | Review |
PowerROC T35 | Epiroc Surface Machine | PowerROC T35 is a tophammer drill rig developed and optimized for construction work and quarrying applications where simple flexibility in positioning is required. | Review |
MUKI FF | Resemin Jumbo | Equipped with Montabert drifter HC 50 (14 kW). | Review |
DC300 | Sandvik Surface Machine | They are perfect for maneuvering in tight spaces and harsh conditions. | Review |
Tiger DG710 | Sandvik Surface Machine | It is an above ground machine that provides power, precision and versatility ideal for construction, quarrying or surface mining operations. | Review |
MUKI LHP | Resemin Jumbo | MUKI LHP is an electro-hydraulic rig for long hole drilling, it has tilt, rotation and pendulum arm, perform precise and smooth movements for parallel holding. | Review |
PowerROC T45 | Epiroc Surface Machine | It is a tophammer drill rig optimized for construction work and quarry applications where simple flexibility in positioning is required. | Review |
DD210L-V | Sandvik Jumbo Machine | DD210L-V is a single boom low profile drilling machine designed to work in excavations with headroom as low as 2.0 m in height. | Review |
DS310 | Sandvik Jumbo Machine | It is a fully mechanized, single-person operated electro-hydraulic compact jumbo for rock reinforcement in small to medium section underground mines. | Review |
BOOMER L2C | Epiroc Boomer Machine | It is a hydraulic tunnel boring machine with two booms with advanced control system. | Review |
SOLO 5-5V | Sandvik Jumbo Machine | It is a highly versatile single boom electro-hydraulic long hole drilling jumbo for small to medium production drilling in underground mines. | Review |
Ranger 500 | Sandvik Surface Machine | Surface hydraulic drifter. It works with the HL510. | Review |
MD5075C | CAT Machine | Achieves large pattern coverage with a sturdy extendable boom and reduces your cycle time with an efficient carousel rod changer. | Review |
DS411 | Sandvik Jumbo Machine | It is a rock reinforcement drill rig designed to install the most common types of rock bolts with steel wire mesh where required. | Review |
DL230L-5 | Sandvik Jumbo Machine | It is a low profile, single boom electro-hydraulic jumbo designed to work in excavations with low headroom down to 2.9 m. | Review |
DT1230-SC | Sandvik Jumbo Machine | Tunneling 203 m² is an electro hydraulic jumbo with 3 booms for fast and accurate drilling. | Review |
Silenced Smartrig D7C | Epiroc Surface Machine | High shift capacity, low energy consumption and innovative modules that increase efficiency. | Review |
AXERA6-226 | Sandvik Jumbo Machine | It is a compact two-boom electro-hydraulic jumbo for fast and accurate drilling in drifting and tunneling sections from 6 to 40 m². | Review |
FACE MASTER 2.5NVDR | Mine Master Jumbo | Reliable hydraulic controls, low operating costs and high performance. | Review |
JOY VEIN RUNNER II | Komatsu Jumbo | The Vein Runner II hydraulic jumbo drill, a single-boom hydraulic rig, is designed for drilling vertical, horizontal and angled holes in underground production or development headings. | Review |
DL420-15C | Sandvik Jumbo Machine | It is an electro-hydraulic long hole drilling rig for large-scale production drilling in underground mines. It is capable of drilling 89 - 127 mm (3 ½” - 5”) holes up to 54 meters. | Review |
JTH2A-90E | Furukawa Jumbo Machine | It is the ideal drill for medium size tunnels. | Review |
DS211L-M | Sandvik Jumbo Machine | A fully mechanical, single-person operated, electro-hydraulic low profile bolting machine for rock reinforcement in excavations with low headroom up to 1.6 m. | Review |
HCR1450ED | Furukawa Surface Machine | Heavy-duty undercarriage with pentagonal cross-section design to reduce dirt build-up and track wear provides strength and durability. | Review |
BOOMER L2D | Epiroc Boomer Machine | For greater productivity, rig components are crafted for extreme durability. | Review |
DX600 | Sandvik Surface Machine | It is an above ground hydraulic rock drill. Equipped with HL650. | Review |
DQ240 | Sandvik Surface Machine | Robust and proven frame design ensures parallelism of drilled holes. | Review |
Boltec MC | Epiroc Boomer Machine | For bolt lengths 1.5–6 m and effective in roof heights up to 12 m. | Review |
DT721 | Sandvik Jumbo Machine | It is an electro-hydraulic jumbo with two booms for fast and accurate drilling in tunneling sections of 8 - 60 m². | Review |
ROC D3 | Epiroc Surface Machine | Offers unmatched access everywhere, no matter how hard the floor. | Review |
STD14M | Soosan / Junjin | The Soosan STD series hydraulic crawler drilling rigs, have been developed to be reliable top hammer drilling rigs for surface blasting. | Review |
STD11T | Soosan / Junjin | The Soosan STD series hydraulic crawler drilling rigs, have been developed to be reliable top hammer drilling rigs for surface blasting. | Review |
DS210L-M | Sandvik Jumbo Machine | A fully mechanical, single-person operated, electro-hydraulic low profile bolting machine for rock reinforcement in excavations with low headroom up to 1.6 m. | Review |
Ranger 800RP | Sandvik Surface Machine | It is an above ground hydraulic rock drill. Equipped with HL800. | Review |
BOOMER S2 | Epiroc Boomer Machine | Equipped with two powerful BUT S booms, Boomer S2 is the most productive drill rig in its class. | Review |
DTH RIG D700 | Everdigm Machine | EVERDIGM down the hole drilling rigs provide superior advantages in various mining and quarry sites. | Review |
HD715 | Bburg Machine | Giving the operator almost a 30m² coverage area surely justifies to call this machine a versatile work horse. | Review |
FlexiROC T40R | Epiroc Surface Machine | It is a very efficient and alternative surface machine for small and medium sized quarry works. | Review |
DL311 | Sandvik Jumbo Machine | It is an electro-hydraulic long hole drill for small to medium production drilling in underground mines. It has the capacity to drill 64 - 102 mm holes up to 38 meters. | Review |
FACE MASTER 3.0 Mk3 | Mine Master Jumbo | It is designed to improve performance and lower operating costs. | Review |
CABLETEC LC | Epiroc Boomer Machine | It is designed for long hole drilling and cable bolting. | Review |
DC700 | Sandvik Surface Machine | Its robust construction and advanced cooling system make it well suited for operating in extreme heat and cold as well as in harsh terrain. | Review |
DINO DC400Ri | Sandvik Surface Machine | It fits perfectly in large quarries, open pit mines and construction sites. | Review |
JD2000 | Soosan / Junjin | It is an above ground drilling machine using 4140 Nm from the DTH group. | Review |
DP1100 | Sandvik Surface Machine | Sandvik has taken the well-known DP series surface drill drills to a whole new level with remarkable increases in their productivity and economy. | Review |
PANTERA 1100 | Sandvik Surface Machine | It is an above ground hydraulic rock drill. Equipped with HL1010. | Review |
DS421 | Sandvik Jumbo Machine | It is a self-contained cable bolting machine for rock reinforcement in small and medium section underground mines and tunnels. | Review |
Ranger DX900i | Sandvik Surface Machine | It has a 290 degree rotating upper structure with 55 m2 drilling coverage. | Review |
SmartROC T40 | Epiroc Surface Machine | The main application area is aggregate quarries where efficiency and environmental impact are very important. | Review |
SIMBA H1254 | Epiroc Boomer Machine | To increase uptime and vehicle life, the rig is designed with easy access to service points for efficient daily checks and maintenance. | Review |
DT1231-SC | Sandvik Jumbo Machine | Tunneling is an electro hydraulic jumbo with 3 booms for fast and accurate drilling. | Review |
DT1231 | Sandvik Jumbo Machine | Tunneling is an electro hydraulic jumbo with 3 booms for fast and accurate drilling. | Review |
DD120L | Sandvik Jumbo Machine | Extra low profile twin boom electro hydraulic jumbo. | Review |
MD5090 | CAT Machine | Power group that’s ideally sized for drilling 89 mm-127 mm (3.5 in-5.0 in) holes. | Review |
DL210 | Sandvik Jumbo Machine | It is a compact and flexible electro-hydraulic long hole jumbo for production drilling in underground mines. | Review |
Ranger DX500 | Sandvik Surface Machine | Ranger DX500 is a hydraulic, self-propelled, self-contained and crawler-based surface rig with an ergonomic, high-visibility cabin and a rod handling system. | Review |
BOOMER M20 | Epiroc Boomer Machine | The hoseless boom design of the Boomer M20 will minimize maintenance costs and maximize up time and productivity. | Review |
ROC D9 | Epiroc Surface Machine | The main application area is aggregate quarries where efficiency and environmental impact are very important. | Review |
DB311 | Sandvik Jumbo Machine | DB311 is a fully autonomous unit based on self-contained diesel hydraulic carrier, with on-board. | Review |
JD800E | Soosan / Junjin | Standard drifter YH70 is equipped with JET-8. It is a new generation hydraulic drill. | Review |
PANTERA 900 | Sandvik Surface Machine | It is an above ground hydraulic rock drill. Equipped with HL1010. | Review |
DT1131-SC | Sandvik Jumbo Machine | Tunneling is an electro hydraulic jumbo with 3 booms for fast and accurate drilling. | Review |
DQ440 | Sandvik Surface Machine | In manual mode, all functions are controlled by the operator. | Review |
SmartROC T45 | Epiroc Surface Machine | It is an effective and efficient tophammer drill rig developed and designed for high performance in tough construction applications. | Review |
HD1210 | Bburg Machine | The best impact surface drills for quarrying, surface mining and construction. | Review |
Raptor 55 XP | Resemin Jumbo | RAPTOR 55 XP is an electro-hydraulic rig for long hole drilling, It has an hydraulic boom, 5APC model, with parallel holding. | Review |
DP1100İ | Sandvik Surface Machine | It is a hydraulic, diesel engine tophammer drill rig. It fits perfectly in large quarries, open pit mines and construction sites. | Review |
DC301R | Sandvik Surface Machine | They are perfect for maneuvering in tight spaces and harsh conditions. | Review |
SmartRIG D9C | Epiroc Surface Machine | SmartRig has groundbreaking hardware with low energy consumption and innovative modules that increase efficiency. | Review |
PANTERA DP1100İ | Sandvik Surface Machine | With practical intelligence, the DP1100i is perfectly suited to large quarries, open pit mines and construction sites. | Review |
ZB21 | Komatsu Jumbo | The ZB21 is built from the ground up with reliable and efficient components for outstanding uptime. | Review |
HCR1400ED | Furukawa Surface Machine | It is the first of FRD's latest generation of top hammer hydraulic crawler drills. | Review |
ECD40 | Everdigm Machine | The advanced and optimized design of the EVERDIGM hydraulic track drill provides safety and comfort. | Review |
JD800 | Soosan / Junjin | Standard drifter YH70 is equipped with JET-8. It is a new generation hydraulic drill. | Review |
Small Bolter 88 | Resemin Jumbo | Allows reinforce efficient and safe structures roofs in underground mines, for small-sized sections from 3.5 x 3.5 up to 5.6 m high. | Review |
DL230L | Sandvik Jumbo Machine | It is a low profile, single boom electro-hydraulic jumbo designed to work in excavations with low headroom up to 1.7 meters. | Review |
Boltec LC | Epiroc Boomer Machine | For bolt lengths 1.5–6 m and effective in roof heights up to 12 m. | Review |
Ranger DX800 | Sandvik Surface Machine | It is an above ground machine that provides power, precision and versatility ideal for construction, quarrying or surface mining operations. | Review |
Ranger DX700 | Sandvik Surface Machine | It is an above ground machine that provides power, precision and versatility ideal for construction, quarrying or surface mining operations. | Review |
Ranger 600 | Sandvik Surface Machine | Surface hydraulic drifter. It works with the HL600. | Review |
SIMBA M7C | Epiroc Boomer Machine | Long-hole drilling rig with tophammer rock drill. | Review |
FlexiROC D60 | Epiroc Surface Machine | It is a proven and reliable machine for downhole drilling in mining and large-scale quarry applications. | Review |
DL320-7C | Sandvik Jumbo Machine | It is an electro-hydraulic long hole drill for small to medium production drilling in underground mines. It has the capacity to drill 64 - 102 mm holes up to 38 meters. | Review |
DT1121i | Sandvik Jumbo Machine | Tunneling with a section of 83 m² is an electro hydraulic jumbo with 3 booms for fast and accurate drilling. | Review |
JD800ENC | Soosan / Junjin | Equipped with standard drifter YH80A. It is a new generation hydraulic drill. | Review |
PANTERA 1500 | Sandvik Surface Machine | It is an above ground hydraulic rock drill. Equipped with HL1560T. | Review |
BOOMER E2 | Epiroc Boomer Machine | Boomer E2 rigs have extensive coverage areas of up to 112 m2, making them ideal for large mining applications and construction projects. | Review |
FACE MASTER 1.4 | Mine Master Jumbo | Designed for drilling blast holes of diameters between 41 mm and 76 mm and of net length 3.2 m. | Review |
JD1400E | Soosan / Junjin | Equipped with standard drifter YH135 - JET-11. It is a new generation hydraulic drill. | Review |
Commando DC125R | Sandvik Surface Machine | It is perfect for maneuvering in tight spaces and harsh conditions. | Review |
MD5150C | CAT Machine | The advantage of the track drill is maximum productivity. | Review |
Troidon 66 XP | Resemin Jumbo | It incorporates the fastest rock drill of the market, Montabert HC 95 of 22 kW, equipped with Back Hammering to prevent rods stuck. | Review |
ROC F7CR | Epiroc Surface Machine | Powerful COPROD drilling machine for fast and straight hole drilling. | Review |
HD1460 | Bburg Machine | The best impact surface drills for quarrying, surface mining and construction. | Review |
Ranger 700RP | Sandvik Surface Machine | Surface hydraulic drifter. It works with the HL710. | Review |
STD11M | Soosan / Junjin | The Soosan STD series hydraulic crawler drilling rigs, have been developed to be reliable top hammer drilling rigs for surface blasting. | Review |
Commando 300 | Sandvik Surface Machine | Offering a wide hole range of 38 to 64 millimeters, the compact sized multi-purpose drill rig is easily moved from one location to another. | Review |
ECD40E | Everdigm Machine | The advanced and optimized design of the EVERDIGM hydraulic track drill provides safety and comfort. | Review |
BOOMER 352 | Epiroc Boomer Machine | It is a rock drill machine used for tunnel boring. | Review |
DD211 | Sandvik Jumbo Machine | DD211 is a single boom electro hydraulic drillrig for productive drilling in narrow vein applications. | Review |
JD1300E | Soosan / Junjin | Equipped with standard drifter JET-9 - YH80A. It is a new generation hydraulic drill. | Review |
DX500 | Sandvik Surface Machine | It is an above ground hydraulic rock drill. Equipped with HL510. | Review |
MD5050 | CAT Machine | With a heavy-duty 3.04 m (10 ft) boom and 0.61 m (2 ft) extension on the MD5050, more pattern coverage is achieved. | Review |
DT821-SC | Sandvik Jumbo Machine | Tunneling with a section of 83 m² is an electro hydraulic jumbo with 3 booms for fast and accurate drilling. | Review |
ROC D7 | Epiroc Surface Machine | The main application area is aggregate quarries where efficiency and environmental impact are very important. | Review |
BOOMER WE3C | Epiroc Boomer Machine | The hydraulic rock drill is designed to work in tunnels up to 187 m². | Review |
BOOMER E2C | Epiroc Boomer Machine | Long-wearing drill steel, high drilling accuracy and reduced overbreak make the Boomer E series a solid investment. | Review |
DD310-26X | Sandvik Jumbo Machine | It is a single boom electro-hydraulic jumbo for mine development and tunneling in sections up to 49 m². | Review |
Boltec 235 | Epiroc Boomer Machine | The Boltec 235 is a robust direct hydraulic-controlled bolting rig designed for medium size underground mining operations. | Review |
SmartROC C50 | Epiroc Surface Machine | Designed with the smallest detail to be given, your safest, fastest and most efficient surface drill rig. | Review |
Boltec LD | Epiroc Boomer Machine | For bolt lengths 1.5–6 m and effective in roof heights up to 12 m. | Review |
DT1130 | Sandvik Jumbo Machine | Tunneling with a section of 83 m² is an electro hydraulic jumbo with 3 booms for fast and accurate drilling. | Review |
STD114D | Soosan / Junjin | The Soosan STD series hydraulic crawler drilling rigs, have been developed to be reliable top hammer drilling rigs for surface blasting. | Review |
DS511 | Sandvik Jumbo Machine | Equipped with the SB120S boom, the DS511 offers the widest coverage currently available for underground mining operations and construction tunnels. | Review |
FlexiROC T35 | Epiroc Surface Machine | FlexiROC T35 is a flexible and versatile tophammer drill rig, developed and designed for high performance in demanding construction applications. | Review |
DT1131i | Sandvik Jumbo Machine | Tunneling is an electro hydraulic jumbo with 3 booms for fast and accurate drilling. | Review |
DX780 | Sandvik Surface Machine | It is mostly used in construction, mines and quarries. | Review |
J-151-DE | Fletcher Jumbo | It is designed for single boom jumbo development. | Review |
Tiger DG810 | Sandvik Surface Machine | It is specifically designed for construction projects, site preparation, wall inspection and pipeline drilling, as well as production drilling in medium-sized quarries. | Review |
DQ500 | Sandvik Surface Machine | It is designed for drilling holes with diameters ranging from 45 to 89 mm. | Review |
Troidon 55 XP | Resemin Jumbo | Front face drilling rig, electro-hydraulic, of 1.85 m width for tunneling in underground mining and civil works, for medium-sized sections from 3.5 x 3.5 m up to 5.5 x 5.5 m. | Review |
MUKI LHBP | Resemin Jumbo | MUKI LHBP is an electro-hydraulic rig for long hole drilling. | Review |
DX680 | Sandvik Surface Machine | It is an above ground hydraulic rock drill. Equipped with HL650. | Review |
JOY DR-2SB | Komatsu Jumbo | The DR-2SB hydraulic jumbo drill, a dual-boom hydraulic rig, is designed for drilling vertical, horizontal and angled holes in underground production or development headings. | Review |
DT1131-JP | Sandvik Jumbo Machine | Tunneling is an electro hydraulic jumbo with 3 booms for fast and accurate drilling. | Review |
DT611 | Sandvik Jumbo Machine | It is a single boom electro hydraulic jumbo for fast and accurate drilling in tunneling and trenching. | Review |
J-152-DE | Fletcher Jumbo | It is designed for jumbo development with two booms. | Review |
HD910 | Bburg Machine | With an oversized cooling package the machine is designed to operate in hot ambient conditions. | Review |
Ranger780RP | Sandvik Surface Machine | Surface hydraulic drifter. It works with the HL800. | Review |
FlexiROC T40 | Epiroc Surface Machine | It is a flexible and versatile tophammer drill rig, developed and designed for high performance in demanding construction applications. | Review |
DT1131-C | Sandvik Jumbo Machine | Tunneling is an electro hydraulic jumbo with 3 booms for fast and accurate drilling. | Review |
HCR900DS | Furukawa Surface Machine | Thanks to advanced hydraulic and compressed air technology, energy capacity can be transferred to each part with minimal loss. In this way, the systems work with high efficiency. | Review |
SmartROC T35 | Epiroc Surface Machine | With its sophisticated intelligence, the tophammer drill rig SmartROC T35 is both user and business friendly. Its main application is in aggregate quarries where efficiency and environmental impact considerations are crucial. | Review |
FTH1AM-709 | Furukawa Jumbo Machine | 64~89mm, over 30m depth for small and medium size production drilling in underground mines. | Review |
DC302R | Sandvik Surface Machine | They are perfect for maneuvering in tight spaces and harsh conditions. | Review |
SIMBA K102 | Epiroc Boomer Machine | Simple and practical Simba K102 is a small diameter long hole drilling machine. | Review |
DX800 | Sandvik Surface Machine | It is mostly used in construction, mines and quarries. | Review |
DD211L | Sandvik Jumbo Machine | DD211L is a low-profile single-boom electro- hydraulic drill designed to work in excavations with headroom as low as 1.7 meters. | Review |
JOY NV-1 | Komatsu Jumbo | The NV-1 hydraulic jumbo drill, a single-boom hydraulic rig, is designed for drilling vertical, horizontal and angled holes in underground production or development headings. | Review |
DD210V | Sandvik Jumbo Machine | The heavy duty and muti-purpose boom offers large optimum shaped coverage and accurate drill positioning. | Review |
ROOF MASTER 1.8 AWK ATEX | Mine Master Jumbo | It is the first underground bolting machine fully certified for operation in an explosive environment. | Review |
PowerROC T25 | Epiroc Surface Machine | It is a top-hammer drill with a proven design. | Review |
ROC D3RRC | Epiroc Surface Machine | Offers unmatched access everywhere, no matter how hard the floor. | Review |
DT821 | Sandvik Jumbo Machine | Tunneling with a section of 83 m² is an electro hydraulic jumbo with 3 booms for fast and accurate drilling. | Review |
DS510 | Sandvik Jumbo Machine | Equipped with the SB120S boom, the DS510 offers the widest coverage on the market. | Review |
Raptor 44 XP | Resemin Jumbo | RAPTOR 44 XP is an electro-hydraulic rig for long hole drilling, It has an hydraulic boom, 4AP model, with automatic parallel holding. | Review |
DD211L-V | Sandvik Jumbo Machine | DD211L-V is a single-boom low-profile drill designed to work in excavations with headroom as low as two meters. | Review |
JOY DR-1SB | Komatsu Jumbo | The DR-1SB hydraulic jumbo drill, a single-boom hydraulic rig, is designed for drilling vertical, horizontal and angled holes in underground production or development headings | Review |
Boltec MD | Epiroc Boomer Machine | The two-stage hydraulic system prevents the drill from jamming and optimizes the drilling process. | Review |
DT1131 | Sandvik Jumbo Machine | Tunneling is an electro hydraulic jumbo with 3 booms for fast and accurate drilling. | Review |
SIMBA 1354 | Epiroc Boomer Machine | To increase uptime and vehicle life, the rig is designed with easy access to service points for efficient daily checks and maintenance. | Review |
JTH2A-210Z | Furukawa Jumbo Machine | It is the ideal drill for medium size tunnels. | Review |
FlexiROC T20R | Epiroc Surface Machine | It makes a difference to all competitors in its class. It makes even the most demanding operations look easy. | Review |
DD320-40 | Sandvik Jumbo Machine | It is a compact two-boom electro-hydraulic jumbo for fast and accurate drilling of 8 - 49 m² sections. | Review |
DS520-TC | Sandvik Jumbo Machine | It is a rock drilling and bolting machine. | Review |
DD2710 | Sandvik Jumbo Machine | It is a compact and flexible single boom electro-hydraulic jumbo for development drilling in narrow tunneling in cross sections up to 34 m². | Review |
ECD45E | Everdigm Machine | The advanced and optimized design of the EVERDIGM hydraulic track drill provides safety and comfort. | Review |
Ranger 700 | Sandvik Surface Machine | Surface hydraulic drifter. It works with the HL710. | Review |
DC122R | Sandvik Surface Machine | They are perfect for maneuvering in tight spaces and harsh conditions. | Review |
DL431 | Sandvik Jumbo Machine | It is an electro-hydraulic long hole drill designed for large-scale production in underground mines. | Review |
HCR1200DSII | Furukawa Surface Machine | High quality piercing hcr 1200-EDII superior efficiency and durability.. | Review |
DS2710 | Sandvik Jumbo Machine | It is a single person operated electro-hydraulic rock collector for rock reinforcement in small to medium section underground mines. | Review |
HD1500D | Bburg Machine | Down the hole (DTH) surface drill rig for drilling in quarries, surface mining and construction. | Review |
ROC F9 | Epiroc Surface Machine | Maximize piercing time. It has a maximum hole depth of 36 m. | Review |
DP900İ | Sandvik Surface Machine | It is a hydraulic, diesel engine tophammer drill rig. It fits perfectly in large quarries, open pit mines and construction sites. | Review |
HCR1600ED | Furukawa Surface Machine | HCR1600-ED is the biggest tophammer hydraulic crawler drill in the FRD range and is designed for large holes. | Review |
Rock Buggy | Epiroc Surface Machine | Rock Buggy is a high quality, high quality hydraulic drive impact drilling machine made for the cutting stone industry. | Review |
DL421 | Sandvik Jumbo Machine | It is an electro-hydraulic long hole drill designed for large-scale production in underground mines. | Review |
DD210 | Sandvik Jumbo Machine | DD210 is a single-boom, electro-hydraulic mining development drill rig engineered for use in tunneling and mining development in cross sections up to 24 square meters. | Review |
ECD35E | Everdigm Machine | The advanced and optimized design of the EVERDIGM hydraulic crawler drill provides access to key components for safety and comfort as well as simple and fast maintenance. | Review |
PowerROC T30 | Epiroc Surface Machine | Developed and designed for demanding applications in civil, aggregate and limestone quarry operations. | Review |
or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.